Gutter repair generally costs $100 to $450, with a national average near $275. Small pitch adjustments, leak sealing, and hanger repairs may cost less than $200, while replacing several damaged sections can cost $500 to $850 or more.
Complete gutter replacement typically costs $2,200 to $5,000, or approximately $12 to $25 per linear foot, including materials and professional installation. Premium copper, zinc, wood, built-in box gutters, difficult access, and extensive fascia damage can push the project well beyond this range.
Whether repair or replacement offers better value depends on the gutter material, age, extent of damage, condition of the fascia boards, and whether the existing system is correctly sized and pitched.
Gutter Costs at a Glance
| Gutter project | Typical U.S. cost |
|---|---|
| Average gutter repair | About $275 |
| Common gutter repair range | $100–$450 |
| Minor leak or pitch repair | $75–$225 |
| Sagging gutter repair | $75–$300 |
| Replace a 20-foot section | $120–$350 |
| Replace a 50-foot section | $300–$850 |
| Full gutter replacement | $2,200–$5,000 |
| Replacement per linear foot | $12–$25 |
| Remove old gutters | $150–$300 |
| Downspout replacement | $30–$525 each |
| Fascia replacement | $6–$20 per linear foot |
| Box gutter replacement | $6,000–$27,000 |
| Gutter guard installation | $3–$12+ per linear foot |
These figures are national estimates rather than guaranteed prices. Home height, roof complexity, gutter material, accessibility, local labor rates, and hidden water damage can significantly affect the final cost.
Average Gutter Repair Cost
Most homeowners pay $100 to $450 for gutter repairs. Simple work commonly costs $2 to $7 per linear foot, while replacing badly damaged sections can cost $5 to $18 per foot or more, depending on the material.
A standard repair may include:
- Sealing a leaking seam
- Replacing loose fasteners
- Installing new hangers
- Correcting the gutter slope
- Reattaching a separated section
- Patching a small hole
- Replacing a damaged downspout
- Securing a loose end cap
- Cleaning debris around the repaired area
Many contractors charge a $75 to $200 minimum service fee, which may include the first hour of work. This means even a very small repair can cost more than the materials alone would suggest.
Gutter Repair Cost by Type of Damage
Leaking gutter repair
Repairing a leaking gutter typically costs $100 to $225.
Small holes may be sealed with roofing cement or a compatible gutter sealant. Leaking joints may need to be cleaned, dried, resealed, and refastened. Applying sealant commonly costs approximately $1.50 to $6.50 per linear foot.
A leak can return when the underlying cause is not corrected. Common causes include:
- Failed seam sealant
- Rust or corrosion
- Loose fasteners
- Standing water
- Improper gutter pitch
- Expansion and contraction
- Debris accumulation
- Ice damage
A gutter with several corroded or leaking sections may be more economical to replace.
Sagging gutter repair
Fixing sagging gutters generally costs $75 to $300.
The contractor may tighten existing screws, replace spikes with stronger fasteners, or install additional hangers. Individual hangers typically cost $2 to $3 before labor, while contractors may charge $50 to $150 per hour for repair work.
Sagging can indicate more than loose hardware. Water-filled gutters are heavy, and the fascia board behind them may be soft or rotten. Attaching new hangers to damaged wood will not provide a lasting repair.
Gutter pitch adjustment
Correcting gutter slope generally costs $75 to $200.
Gutters must slope gently toward their downspouts. A system that is too level may hold standing water, while an excessive slope can look uneven and send water too quickly toward one outlet.
The repair commonly involves loosening the brackets, resetting the gutter at the correct angle, and securing the fasteners in sound wood.
Separated gutter sections
Reconnecting a separated joint may cost $100 to $300, depending on its location and condition.
The contractor may need to replace connectors, reseal the joint, add support, or replace the surrounding section. Sectional gutters are usually easier to repair because one piece can be removed without replacing an entire long run.
Seamless gutters contain fewer joints but can be harder to repair after major impact damage because a long continuous section may need replacement.
Damaged gutter section replacement
Replacing individual gutter sections generally costs:
| Damaged length | Typical replacement cost |
|---|---|
| 10 feet | $75–$170 |
| 20 feet | $120–$350 |
| 30 feet | $180–$500 |
| 40 feet | $240–$680 |
| 50 feet | $300–$850 |
Prices depend on material, height, accessibility, and whether the replacement can connect cleanly to the remaining gutter system.
Downspout repair or replacement
Replacing a basic downspout generally costs $30 to $75, although steel, copper, and seamless downspouts cost considerably more.
| Downspout material | Cost per linear foot | Typical cost per downspout |
|---|---|---|
| Vinyl | $3–$4 | $30–$60 |
| Aluminum | $4–$5 | $40–$75 |
| Steel | $6–$12 | $60–$180 |
| Seamless metal | $6–$17 | $60–$255 |
| Copper | $15–$35 | $150–$525 |
Most residential downspouts are approximately 10 to 15 feet long. Extensions, underground drainage connections, splash blocks, and complicated offsets add to the price.
Full Gutter Replacement Cost
A complete gutter replacement generally costs $2,200 to $5,000, including labor and materials. The average installed rate is approximately $12 to $25 per linear foot.
Most homes have around 100 to 200 linear feet of gutters. Approximate replacement prices by home size include:
| Home size | Typical gutter length | Estimated replacement cost |
|---|---|---|
| 1,000 sq. ft. | 130 feet | $1,600–$3,300 |
| 1,500 sq. ft. | 150 feet | $1,800–$3,800 |
| 2,000 sq. ft. | 180 feet | $2,200–$4,500 |
| 2,500 sq. ft. | 200 feet | $2,400–$5,000 |
| 3,000 sq. ft. | 220 feet | $2,600–$5,500 |
| 3,500 sq. ft. | 240 feet | $2,900–$6,000 |
These estimates assume a relatively straightforward single-story roofline. Two-story homes, complex roof edges, and limited access cost more.
Gutter Replacement Cost by Material
Aluminum gutters
Aluminum gutters generally cost $10 to $20 per linear foot installed, or approximately $2,000 to $4,000 for 200 feet.
Aluminum is widely used because it is lightweight, rust-resistant, available in many colors, and compatible with seamless fabrication. It can dent from ladders, falling branches, or severe hail.
Vinyl gutters
Vinyl gutters typically cost $8 to $12 per linear foot installed, making them one of the least expensive options.
They do not rust and are relatively easy to handle, but extreme cold can make vinyl brittle. High heat and prolonged sun exposure can also cause fading or distortion over time.
Steel gutters
Steel gutters generally cost $10 to $35 per linear foot installed.
Steel is strong and can handle heavy rain, snow, and falling debris better than lightweight materials. Galvanized steel may eventually rust if its protective coating is scratched or damaged.
Copper gutters
Copper gutters commonly cost $25 to $40 or more per linear foot installed, putting a 200-foot project at approximately $5,000 to $8,000.
Copper does not rust and develops a distinctive patina. Installation requires specialized skills because joints are commonly soldered rather than sealed like standard aluminum systems.
Zinc gutters
Zinc gutters generally cost $35 to $45 per linear foot installed, or approximately $7,000 to $9,000 for 200 feet.
Zinc develops a protective patina and can last for decades, but it requires an experienced installer and represents a significant upfront investment.
Wood gutters
Wood gutters generally cost $25 to $45 per linear foot installed.
They are normally selected for historic or high-end properties. Wood requires regular sealing, painting, and maintenance to limit rot and water damage.
Seamless vs. Sectional Gutter Cost
Seamless gutters are formed on-site to match the length of each roof edge. They contain fewer joints than sectional systems, reducing the number of locations where leaks can develop.
Seamless gutter prices vary by material. Angi estimates basic seamless materials from roughly $3 per foot for vinyl to $45 per foot for zinc, with professional seamless installation labor commonly adding $4 to $10 per linear foot.
Sectional gutters are assembled from prefabricated lengths. They are generally less expensive and easier to replace in small sections, but each seam creates another potential leak point.
Seamless gutters are usually the better long-term option for aluminum installations, while sectional systems may make sense for limited repairs or lower-budget projects.
Additional Gutter Replacement Costs
Removing old gutters
Removing and disposing of old gutters generally costs $150 to $300, or approximately $1 to $2 per linear foot.
Some contractors include removal in the replacement quote. Others list it separately, especially for heavy steel, copper, built-in, or difficult-to-access gutters.
Fascia and soffit repairs
Fascia replacement generally costs $6 to $20 per linear foot, while soffit replacement costs approximately $1.50 to $3 per square foot.
The fascia board supports the gutters. Rotten or soft fascia must be repaired before a new system is installed, or the gutter fasteners may pull out under the weight of rainwater, leaves, snow, or ice.
Gutter guards
Gutter guards generally add approximately $3 to $12 or more per linear foot, depending on the screen, mesh, cover, or professionally installed protection system.
Guards can reduce large debris accumulation, but they do not make the gutter system maintenance-free. Small particles, roof granules, seeds, and organic material can still collect inside or on top of the guards.
Oversized gutters
Six-inch gutters commonly add approximately $1 to $2 per linear foot compared with standard five-inch residential systems.
Oversized gutters may be appropriate for large or steep roofs and regions with intense rainfall. Correct sizing should account for roof area, slope, downspout capacity, and local rainfall intensity.
Box gutter repair and replacement
Built-in box gutters are part of the roof structure and are common on some older or historic homes.
Replacing box gutters generally costs $6,000 to $27,000, or approximately $40 to $180 per linear foot. Lining them with rubber, epoxy, or metal typically costs $1,000 to $8,000, depending on the material and condition.
Factors That Affect Gutter Costs
Home height
Two-story homes can add $1 to $3 or more per linear foot because installers need taller ladders, additional safety equipment, and more time moving materials.
Roof complexity
Multiple rooflines, dormers, corners, valleys, and unusual angles require more fittings and labor. Difficult roof access can add approximately 10% to 30% to installation costs.
Accessibility
Fences, landscaping, decks, neighboring buildings, sloped ground, and overhead utility lines may interfere with ladder placement. Limited access can increase labor costs by approximately 15% to 25%.
Water damage
Leaks and overflowing gutters may damage:
- Fascia
- Soffits
- Siding
- Roof decking
- Exterior paint
- Foundation drainage
- Landscaping
Repairing these areas can cost more than the gutter work itself.
Repair or Replace the Gutters?
Repair is usually more economical when:
- Damage is limited to one or two sections
- The gutters are still securely attached
- Most of the material remains free of corrosion
- Leaks occur only at a few seams
- The system is correctly sized
- Replacement material can be matched
Complete replacement deserves consideration when:
- Gutters have widespread rust or cracking
- Several sections sag or pull away
- Leaks occur throughout the system
- Water consistently overflows despite cleaning
- The system is undersized
- Fascia repairs require removal of most gutters
- Replacement sections are unavailable
- Repairs approach 30% to 50% of replacement cost
A $150 seam repair makes sense on a sound aluminum system. Spending $800 to repair several deteriorated sections may not provide good value when a complete standard replacement costs a few thousand dollars.
Can You Repair or Replace Gutters Yourself?
Small one-story sectional repairs may be manageable for homeowners with appropriate tools and ladder experience. Seamless fabrication, multi-story installation, rotten fascia, copper soldering, and complex drainage layouts are better left to professionals.
Gutter work requires frequent ladder repositioning and can involve wet surfaces, uneven ground, power lines, and roof edges. OSHA ladder rules require stable setup, proper access, and appropriate fall protection in professional settings, illustrating the level of risk involved in elevated work.
Professional installation is generally safer when:
- The home has two or more stories
- Ground conditions are uneven
- The roof is steep
- Gutters are close to electrical lines
- Fascia boards are damaged
- Long seamless sections are required
- Heavy steel, zinc, wood, or copper is being installed
How to Save Money on Gutter Repair or Replacement
- Address small leaks early. Water damage to fascia and soffits can cost more than the original repair.
- Clean gutters regularly. Standing water and compacted debris strain seams and hangers.
- Get at least three itemized quotes. Compare material, gauge, size, downspouts, removal, and repairs.
- Replace only damaged sections when practical. Sectional systems are particularly suitable for localized replacement.
- Choose seamless aluminum for balanced value. It offers fewer joints without the premium price of copper or zinc.
- Confirm fascia condition first. Avoid installing new gutters over rotten wood.
- Ask whether removal is included. This prevents unexpected disposal charges.
- Use adequate downspouts. More drainage capacity may solve overflow without replacing every gutter.
- Avoid automatic guard upgrades. Compare the guard price with expected cleaning savings.
- Combine fascia and gutter work. Completing both during one project can reduce repeated setup costs.
Frequently Asked Questions
How much does gutter repair cost?
Most gutter repairs cost $100 to $450, with an average near $275.
How much does complete gutter replacement cost?
Full replacement generally costs $2,200 to $5,000, or approximately $12 to $25 per linear foot.
How much does it cost to replace 20 feet of gutter?
Replacing a 20-foot section generally costs $120 to $350, depending on the material and accessibility.
How much do aluminum gutters cost?
Professionally installed aluminum gutters commonly cost $10 to $20 per linear foot, or $2,000 to $4,000 for 200 feet.
Is it cheaper to repair seamless gutters?
Minor sealing and hanger repairs may be inexpensive. Major physical damage can require replacing an entire seamless run rather than one short section.
How long do gutters last?
Vinyl systems commonly last around 10 to 20 years, aluminum around 20 to 30 years, and premium copper or zinc systems can last 50 years or longer with proper installation and maintenance.
Does gutter replacement include downspouts?
Often, but not always. Verify the number, material, length, outlets, extensions, and underground connections included in the estimate.
Conclusion
Gutter repair generally costs $100 to $450, while a full gutter replacement commonly costs $2,200 to $5,000. Minor pitch, hanger, and leak repairs may cost less than $225, while replacing several damaged sections can reach $850 or more.
Material is one of the largest replacement-cost factors. Vinyl is generally the least expensive, aluminum offers a strong balance of cost and durability, and copper, zinc, and wood are premium options.
Before approving the project, request an itemized quote covering the gutter material, linear footage, size, style, downspouts, removal, fascia repairs, accessories, and warranty. Repairing an otherwise sound system can save thousands, but replacing widespread damage is usually more reliable than continuing to patch failing gutters.